“How to properly mount the system, where in the room to install a panel for maximum effective operation?”
“For quick and even warming up the room, economical work, it is recommended to install Termoplaza heaters in places of maximum heat loss (the coldest wall, under the window) at a distance of 10-12 cm from the floor.”
What are the guarantees of the working capacity of the panel?
TermoPlaza panels have been produced since 2009, during this period they were purchased by more than 8000 people throughout Ukraine. Before going on sale, each panel is tested by the technical control department. The properties of each panel are checked and correspond to the description. To each panel is a technical passport, instruction manual and warranty card for 3 years.
What is the difference between ceramic and your panels?
In 2011, we also made ceramic panels, as it was a brand. But in terms of their thermo-technical properties, they were not sufficiently effective, because ceramics is a high-density material and absorbs the heat emitted by the infrared rays, the consequence – the warming up of the room deteriorated. Termoplaza panels are 1.5 times more effective than ceramic ones thanks to the metal casing.
How quickly do the panels cool down?
The panels cool down for 10 minutes, but they have a cumulative effect, now the objects and walls in the room will give off heat. The average loss of heat with the panel turned off is 1-1.5 ° C per hour.
“Is your product certified and how safe is it?”
“All products are certified and have: – Quality Certificate UkrSEPRO from NPP” International Standards and Systems “- Conclusion of the State Sanitary and Epidemiological Service of the Ministry of Health of Ukraine on the conformity of products to the established medical safety criteria according to DSTU GOST, IEC, CISPR, can be absolutely safe to use for all types of premises, including in general educational institutions. ”
“What should be considered and what to look for when selecting Termoplaza models for your premises?”
“When selecting Termoplaza panels, first of all, it is necessary to take into account the heat-technical characteristics of the heated room: – with standard TTX (the building is insulated), the calculation is made 50 W per 1 m2 – with non-standard TTX (not sufficient insulation), the calculation is made with a 20-30% margin power – as additional heating – 35 W per 1 m2. ”
“The law of conservation of energy has not been canceled, how do you manage to achieve consumption of just 0.375 kW / 10m2, with the standard 1.0 kW / 10m2?”
“Of course, we can not cancel the law of conservation of energy, but thanks to our technology, we can get the maximum efficiency from the spent kilowatts in thermal energy.In the first place, our heaters use a special low-power heater created with the use of conversion technology.Secondly, the heater creates two types of heat: infrared heat and convection heat, in combination, two types of heating provide a relatively fast and uniform heating of the room. Thirdly, the heater has a large loschadi teplootdavaemoy surface. All these factors contribute to the fact that, in practice, we get what we Termoplaza heaters up to three times more efficient than a convector heaters and oil or electric boilers. ”
“What kind of heating element is used in your heaters and why do you give a guarantee of 24 months, and Termoplaza’s service life is 25 years?”
“Termoplaza” energy-saving heaters use a German high-resistance resistive heating element based on amorphous alloys, the company keeps the heater in a secret, but we guarantee that the heaters meet the stated specifications, do not emit combustion products, are absolutely safe. up to 25 years, is associated with special experiments and calculations of the operating life of the heating element.We provide a 36-month guarantee in accordance with the Law of Ukraine “On Defense” those rights of consumers. ”